Sony PMW-F3K - Manual (Page 125)

Setup Menu List 125
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
Battery INFO
Showing
information
regarding the
battery pack
(display only)
Type The type (product name) is displayed.
MFG Date The date of manufacture is displayed.
Charge Count The accumulated number of times of charge/discharge is
displayed.
Capacity The estimated total capacity of full charge is displayed.
Voltage The current output voltage is displayed.
Remaining The current remaining level is displayed.
Genlock
Setting Genlock
operation
H Phase (HD)
–999 to +999 (±0)
Set the H phase (phase of the horizontal sync signal) of HD
signal for genlock operation.
H Phase (SD)
–999 to +999 (±0)
Set the H phase (phase of the horizontal sync signal) of SD
signal for genlock operation.
Trigger Mode
Setting whether to
trigger recording
start/stop for an
external device
connected to via
the i.LINK(HDV/
DV) connector
Internal / Both / External Internal: To activate recording start/stop operations only for
an SxS memory card in a built-in slot.
Both: To activate recording start/stop operations both for an
SxS memory card in a built-in slot and the external
recording device connected via the i.LINK(HDV/DV)
connector.
External: To activate recording start/stop operations only for
the external recording device connected via the
i.LINK(HDV/DV) connector.
OTHERS
Menu items Subitems and setting values Contents