Sony 3-289-204-12(1) - Manual (Page 116)

116 US
D:\SONY HA\3289204121\01US-STRDA2400ESUC\090OTH.fm masterpage: Left
STR-DA2400ES
3-289-204-12(1)
Selecting a preset station
1 Press TUNER repeatedly to select the
FM or AM band.
2 Press PRESET+ or PRESET –
repeatedly to select the preset station
you want.
You can also press SHIFT, then press
numeric buttons to select the preset station
you want. Then, press
to enter the
selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET”
then use TUNING +/– to select the preset
station you want.
For details on XM/SIRIUS Radio service,
refer to “Listening to satellite radio” (page 76)
in “Tuner Operations”.
Aiming the XM Radio or SIRIUS
Antenna
You can use “XM ANT AIM” or “SR ANT
AIM” in the Tuner settings menu to help you
aim the antenna for optimal signal reception.
1 Press XM to select “XM RADIO” or
press SIRIUS to select “SIRIUS”.
You can also use INPUT SELECTOR on
the receiver.
2 Press AMP.
3 Press MENU.
4 Press V/v repeatedly to select
“<TUNER>”.
5 Press or b to enter the menu.
6 Press V/v repeatedly to select “XM
ANT AIM” or “SR ANT AIM”.
7 Press or b to enter the parameter.
8 While checking the parameter, aim your
antenna to where the best reception
will be received.
For details on the parameter, see “XM
Signal Strength” or “SIRIUS Signal
Strength” below.
XM Signal Strength
SIRIUS Signal Strength
Listening to satellite tuner
Signal
strength Signal type
Satellite Terrestrial
GOOD S:3 T:3
MARGINAL S:2 T:2
WEAK S:1 T:1
NO SIGNAL S:0 T:0
Signal
Strength Signal type
Satellite Terrestrial
EXC (excellent) S:3 T:3
GOOD S:2 T:2
WEAK S:1 T:1
NONE S:0 T:0