Sony 3-289-204-12(1) - Manual (Page 117)

117 US
D:\SONY HA\3289204121\01US-STRDA2400ESUC\090OTH.fm masterpage: Right
STR-DA2400ES
3-289-204-12(1)
Oth
e
r Op
eratio
ns
Checking the Satellite Tuner ID
1 Press XM to select “XM RADIO” or
press SIRIUS to select “SIRIUS”.
You can also use INPUT SELECTOR on
the receiver.
2 Press TUNING + or TUNING – to select
channel 0.
You can also press TUNING MODE on the
receiver to select “AUTO” then turn
TUNING +/– to select channel 0.
3 Check the XM ID or SIRIUS ID on the
display and write it in the space
provided here.
XM ID:_____________________
SIRIUS ID:_______________________
Selecting channels from a
category (CATEGORY TUNING)
1 Press XM to select “XM RADIO” or
press SIRIUS to select “SIRIUS”.
You can also use INPUT SELECTOR on
the receiver.
2 Press CATEGORY MODE repeatedly
to select “ONE CAT”.
• ALL CAT: You can select a channel from
all the categories. The initial setting is
“ALL CAT”.
• ONE CAT: You can select a channel from
one category. “CAT” lights up on the
display when you set to “ONE CAT”
mode.
3 Press CATEGORY + or CATEGORY –
to select the category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
4 Press TUNING + or TUNING – to select
the channel.
You can also press TUNING MODE on the
receiver to select “AUTO”, then turn
TUNING +/– to select the channel.
Selecting a channel number
directly (Direct tuning)
1 After selecting satellite tuner, press
D.TUNING.
2 Press SHIFT, then press numeric
buttons to enter the channel number.
3 Press .
Displaying the satellite tuner
information
Press DISPLAY repeatedly.
Each time you press DISPLAY while tuning in
the channel, the display changes cyclically as
follows:
Channel name
t Channel number t
Category name t Artist name/Feature t
Song/Program title t Composer name
(SIRIUS only) t Signal strength t Sound
field currently applied t Volume