Confirming/saving the measurement results – Sony 3-289-204-12(1) User Manual

Page 47

Advertising
background image

47

US

D:\SONY HA\3289204121\01US-STRDA2400ESUC\030CON.fm

masterpage: Right

STR-DA2400ES
3-289-204-12(1)

Getting Star

ted

To cancel the measurement

The measurement will be canceled when you
do the following:
– Press ?/1, input buttons or MUTING.
– Press SPEAKERS (OFF/A/B/A+B) on the

receiver.

– Change the volume level.
– Connect the headphones.

1

Confirm the measurement
result.

When the measurement ends, a beep
sounds.

2

Press

V/v to select the item you

want, then press

.

* When the speaker(s) is (are) out of the phase,

“OUT” is displayed on the TV screen. The
“+” and “–” terminals of the speaker may be
connected the other way around. However,
depending on the speakers, “OUT” appears
on the TV screen even though the speakers
are connected properly. This is because of the
speakers’ specifications. In this case, you can
continue to use the receiver.

3

Select “Save” in step 2, then
press

to save the

measurement result.

Confirming/saving the
measurement results

Item

Explanation

Retry

Performs the Auto
Calibration again.

Save

Saves the measurement
results and exits the setting
process.

Warning

Displays warning
concerning the
measurement results. See
“Message list after Auto
Calibration measurement”
(page 49).

Phase*

Displays the phase of each
speaker (in phase/out of
phase).

Distance

Displays the measurement
result for speaker distance.

Level

Displays the measurement
result for speaker level.

Exit

Exits the setting process
without saving the
measurement results.

continued

Advertising
This manual is related to the following products: