Making settings with the test tone menu, When a test tone is not output from the speakers – Sony 3-289-204-12(1) User Manual

Page 70

Advertising
background image

70

US

D:\SONY HA\3289204121\01US-STRDA2400ESUC\070SET.fm

masterpage: Left

STR-DA2400ES
3-289-204-12(1)

1

Press GUI MODE repeatedly to
select “GUI ON”.

“GUI MODE” appears on the display
window of the receiver and the GUI menu
appears on the TV screen. Press MENU
if the GUI menu does not appear on the
TV screen.

2

Press

V/v repeatedly to select

“Settings”, then press

or

b.

The Settings menu list appears on the TV
screen.

3

Press

V/v repeatedly to select

“Speaker”, then press

or

b.

4

Press

V/v repeatedly to select

“Test Tone”, then press

or

b.

You can select the test tone type.

5

Press

V/v repeatedly to select

the speaker you want to adjust,
then press

.

The test tone is output from each speaker
in sequence.

6

Adjust the parameter using

V/v,

then press

.

Tips

• To adjust the level of all speakers at the same

time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.

• The adjusted value is shown on the display

during adjustment.

When a test tone is not output
from the speakers

• The speaker cords may not be connected

securely. Check to see if they are connected
securely and cannot be disconnected by
pulling on them slightly.

• The speaker cords may have the short-circuit

problem.

When a test tone is output from
a different speaker than the
speaker displayed on the
screen

The speaker pattern to the connected speaker
is not set up correctly. Make sure the speaker
connection and the speaker pattern match.

Making settings with the Test
Tone menu

MODE

GUI

MODE

SLEEP

NIGHT

MODE

RESOLUTION

MUSIC

MOVIE

HOME

A.F.D.

A.DIRECT

2CH/

INPUT

MODE

GUI

MODE

SLEEP

NIGHT

MODE

RESOLUTION

MUSIC

MOVIE

HOME

A.F.D.

A.DIRECT

2CH/

INPUT

1
2-6

Advertising
This manual is related to the following products: