Sony 3-289-204-12(1) - Manual (Page 24)

24 US
D:\SONY HA\3289204121\01US-STRDA2400ESUC\030CON.fm masterpage: Left
STR-DA2400ES
3-289-204-12(1)
4b: Connecting the video components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to “Component to be connected” below
for the pages which describe how to connect
each component.
After hooking up all your components,
proceed to “5: Connecting the antennas
(aerials)” (page 35). The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Notes
• Before connecting cords, be sure to disconnect the
AC power cord.
• Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. If the power supply
of the receiver is not turned on, neither video nor
audio is transmitted.
Converting video signals
This receiver is equipped with a function for up-
converting video signals. For details, see page 32.
How to hook up your
components
Component to be connected Page
TV 18
With HDMI jack 25
Blu-ray disc player 28
DVD player 29
Satellite tuner, Set-top box 30
DVD recorder, VCR 31
Camcorder, video game, etc. 31
Video input/output jacks to be
connected
Digital Analog
High quality image