Samsung 204Ts - Manual (Page 12)

POWER S/W
: Switch the monitor on and off.
POWER IN
: Power cord, plugs into monitor and wall receptacle.
DVI port (Source : Digital) :
Connect the DVI cable to the DVI port on the back of your
monitor.
D-sub 15-pin port (Source : Analog) :
Connect the signal cable to the 15-pin,
D-sub connector on the back of your monitor.
C-VIDEO (Source : Video) / S-VIDEO (Source : S-Video) :
Rear
(The configuration at the back of the monitor may vary from product to product.)