Samsung 15-1981 - Manual (Page 12)

12
OPERATION
OPERATING THE
CONVERTER’S
RECEIVER
Press POWER on the converter or re-
mote control to turn the converter and
the switched AC outlet on and off.
When you turn off the converter, a dot
appears on the lower right corner of
the display to indicate that the con-
verter is in standby mode.
Press CHANNEL or on the con-
verter to select individual channels, or
hold down
CHANNEL or to scan
channels in the direction of the arrow.
The selected channel appears on the
display.
Press VOLUME on the converter or
VOL on the remote control to in-
crease the volume, or press VOLUME
on the converter or VOL on the
remote control to decrease it.
Press CATV / TV to select either the
CATV or TV mode. In TV mode, U
(TV) appears before the channel num-
ber on the display.
Sample Display Indications
• 125 — CATV Channel 125.
• U16 — TV Channel 16.
• U52. — TV Channel 52 is a
favorite channel.
• 11.5 — CATV Channel 115 is
receiving a program and the sleep
timer has been set up.
• 1.2.5. — CATV Channel 125 is
locked and it is also a favorite
channel. The sleep timer has
been set up.
•
⊆⊆
— Press MEM or FAV to start a
memory operation.
•
∪•∪
— Press PL to activate
parental lock.
•
∪
. 1 — the 1st digit of a parental
control code.
•
∪
. 2 — the 2nd digit of a parental
control code.
•
∪
. 3 — the 3rd digit of a parental
control code.
•
⊂⊂
— Press FINE TUNE to con-
firm your entry, or store a pro-
grammed function in memory.
•
⊃⊃
— Press FINE TUNE to con-
firm your entry, or erase a pro-
grammed function from memory.
Standby/Favorite Channel
Sleep Timer
Parental Lock
15-1981.fm Page 12 Tuesday, March 30, 1999 9:09 AM