Connecting the converter to ac power, Turning the converter on/off – Samsung 15-1981 User Manual

Page 5

Advertising
background image

5

Caution: To avoid damaging your
converter, make sure your converter is
not connected to an AC outlet before
setting

IRC/HRC/STD

.

Note: If you are not sure what type of
channel frequency system your cable
system uses, contact your local cable
company.

If the cable system in your area is not
standard, use a paper clip or other
pointed object to set

IRC/HRC/STD

on

the bottom of the converter for the
type of cable system you have.

Note: HRC and IRC are methods
used by some cable companies for
converting satellite and local broad-
cast channels to cable channels.
Channels 5 and 6 on IRC systems and
all channels on HRC systems are
slightly different frequencies from
those used on standard systems.

CONNECTING THE
CONVERTER TO AC
POWER

Plug the converter’s power cord into a
standard AC outlet.

TURNING THE
CONVERTER ON/OFF

To turn the converter on or off, press

POWER

on the front of the converter or

on the remote control.

15-1981.fm Page 5 Tuesday, March 30, 1999 9:09 AM

Advertising