Samsung RF266AA - Manual (Page 15)

Setting Up _1
01
setting uP
ADJusting tHe FReezeR DRAweR LeVeL
1. Locate the height-adjuster ( 1 ) in the freezer drawer.
Unscrew the four Phillips screws (  ) slightly to loosen the door.
2. Loosen the controller screw(  ) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
After adjustment, tighten the screws ( 
)&(

) in reverse order.
CASE) The slope is about 2mm (0.08inch) as shown below.
- Rotate down the adjuster-face with +2.0 number to reduce
the door slope.
- The number of the adjuster to rotate depends on the slope.
Slope
Reference
plane
Freezer Drawer
Adjustment part
1