Sony 2-678-737-13(1) - Manual (Page 60)

Chapter 4
Dubbing to another equipment using i.LINK jack, Duplication, Audio Dubbing, and Connecting with a Computer
60
Chapter 4 Dubbing to another equipment using i.LINK jack, Duplication, Audio Dubbing, and Connecting with a Computer
You can record just sound on a recorded tape.
(Audio dubbing)
Notes
• You can dub the sound onto a DVCAM-formatted
tape recorded in the 32 kHz audio mode (4-channel/
12 bits) only. You cannot dub the sound on a tape in
the 48 kHz audio mode (2-channel/16 bits). If the
audio mode of the recorded tape is 32 kHz, you can
dub the sound regardless of [AUDIO MODE] setting
in [AUDIO SET] menu.
For details on “AUDIO MODE,” see “AUDIO SET”
menu on page 73.
• The sound is dubbed only onto channels 3/4.
You cannot dub the sound onto channels 1/2.
Connection of external devices
The following shows an example of a basic connection
for audio dubbing.
When an HDMI cable is used for connection, Audio
cable connection is not necessary.
Audio Dubbing
VIDEO OUTPUT
AUDIO OUTPUT
Audio
input
AUDIO INPUT
Video
input
Audio output
HVR-M25 (rear panel)
Headphones
PHONES
HVR-M25
(front panel)
Sound source
Monitor
: Signal flow