Sony WEGA KV-20FV300 - Manual (Page 27)

21
Operating Instructions
Options Menu
MTS
Multi-Channel
TV Sound Press F or f to select one of the following options:
Stereo: Select when viewing a broadcast in stereo.
Mono: Select to reduce noise in areas of poor reception.
Auto SAP: Select to have the TV automatically to a Second Audio
Program (SAP) when a signal is received.
Speaker
Custom
selection of
audio output
source On: Select to listen to the sound from the TV speakers with or without a
separate stereo system.
Off:
Select to turn off the TV speakers and listen to the TV’s sound only
through external audio system speakers.
Audio Out
Use to control
the TV’s volume
through a stereo Audio Out settings can only be set when speakers are set to Off.
Variable:
Adjust the volume through your TV.
Fixed: Adjust the TV volume through a connected stereo.


If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does
not output sound, change your Audio setting to Stereo or Mono.
Speaker : On
Audio Out : Fixed
Options
Select End Return
MTS : Stereo
To access the Options menu, first open the Audio menu by referring to the
following steps:
To Display To Highlight To Select
Press f to highlight Options, then press g .


Press for direct MTS settings (Stereo, Mono, Auto SAP).


Audio Out settings can only be set when Speaker is set to Off.