Sony WEGA KV-20FV300 - Manual (Page 28)

Using the Menus
22
Using the Channel Setup Menu
Favorite
Channels
Quick access
to favorite
channels Press g to open Favorite Channels menu:
1 Use the F or f buttons to select the position (1-5) where you want to set
a favorite channel. Then press .
2 Using the F or f buttons, select the desired channel.
3 Press to change to the channel selected.
4 Press G to return to the Channel Setup menu or press to exit.
Cable On: Select if you are receiving cable channels with a CATV cable.
Off: Select if you are using a TV antenna.
Channel Fix 2-6: Select when you want to control all channel selection through a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use the
cable box’s or VCR’s remote control for channel selection.
Video 1:
Select from available video inputs when you have connected
video equipment (e.g. satellite receiver) and you want your TV fixed to it.
Off:
Channel Fix is not set.
Auto Program Press g to perform Auto Program.
Perform Auto Program whenever setting up your TV.
The TV will scan through all available channels and program receivable
channels.
To access the Channel Setup menu, refer to the following steps:
To Display To Highlight To Select
Channel Setup
Favorite Channels
Cable : On
Channel Fix : Off
Auto Program
Channel Skip/Add
Channel Label
Move Select End


To use Favorite Channels: Exit all menus and press . Press F or f to move the cursor to
the desired channel number and press .


After changing your cable settings, you will need to perform Auto Program. When
Channel Fix is set, you will not be able to use your cable settings.