Samsung 8500 - Manual (Page 87)

English - 8
Input cables (Sold seperately)
HDMI HDMI-DVI Component Composite(AV) Coaxial (RF) VGA
Installing the Stand
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using
the screws.
1. Attach your LED TV to the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when
attaching it.
To make sure the TV is installed on the stand at a proper level, do not apply
excess downward pressure to the upper left or right sides of the TV.
2. Fasten screws at position 1 and then fasten screws at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the
LED TV placed down, it may lean to one side.
Disconnecting the Stand
1. Remove screws from the back of the TV.
2. Separate the stand from the TV.
Two or more people should carry the TV.
. Cover the bottom hole with the cover.
❑
¦
N
N
N
N
N
¦
N
1
2
Front
Back
[8500-NA]BN68-02322C-Eng.indb 85 2009-07-28 �� 11:23:57