Press enter – Sony DVP-K82P User Manual

Page 21

Advertising
background image

21

H

ook

up
s

6

Press ENTER.

The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.

7

Press X/x to select the setting that
matches your TV type.

If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 68)

If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN

(page 68)

8

Press ENTER.

The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.

9

Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press

ENTER.

If you did not connect an AV amplifier
(receiver), select “NO,” then go to step
13.
If you connected an AV amplifier
(receiver) using just an audio cord, select
“YES: LINE OUTPUT L/R (AUDIO),”
then go to step 13.
If you connected an AV amplifier
(receiver) using either a digital optical or
coaxial cord, select “YES: DIGITAL
OUTPUT.”

10

Press X/x to select the type of

Dolby Digital signal you wish to
send to your amplifier (receiver).

If your AV amplifier (receiver) has a
Dolby Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”

11

Press ENTER.

“DTS” is selected.

12

Press X/x to select whether or

not you wish to send a DTS signal
to your amplifier (receiver).

If your AV amplifier (receiver) has a
DTS decoder, select “ON.” Otherwise,
select “OFF.”

13

Press ENTER.

Quick Setup is finished and connections
are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 71).

SCREEN SETUP

TV TYPE:

16:9

4:3 LETTER BOX

4:3 PAN SCAN

BACKGROUND:

SCREEN SAVER:

4:3 OUTPUT:

16:9

YES

NO

Is this player connected to an
amplifier (receiver) ? Select the type
of jack you are using.

LINE OUTPUT L/R (AUDIO)

DIGITAL OUTPUT

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
MPEG:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

D-PCM

DTS:

DOLBY DIGITAL

48kHz/96kHz PCM:

48kHz/16bit

D-PCM

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
MPEG:

OFF

STANDARD

ON

DOWNMIX:

DOLBY SURROUND

D-PCM

PCM

DTS:
48kHz/96kHz PCM:

OFF

OFF

ON

Advertising