Troubleshooting, Ic recorder – Sony IC RECORDER ICD-P530F User Manual

Page 51

Advertising
background image

ICD-P530F GB 3-097-349-12 (1)

1

GB

T

ro

ub

le

sh

oo

tin

g

Troubleshooting

Troubleshooting

Before taking the unit for repair, check the following sections. Should any problem

persist after you have made these checks, consult your nearest Sony dealer.

IC recorder

Symptom

Remedy

The unit does not operate.

The batteries have been inserted with incorrect polarity (page

9).
The batteries are weak.
The buttons are locked with the HOLD switch (page 7). (If you

press any button, “HOLD” will flash three times.)

No sound comes from the

speaker.

The ear receiver or headphones are plugged in.
The volume is turned down completely.

“FULL” is displayed and you

cannot start recording.

The memory is full. Erase some of the messages (page 30).
99 messages have been recorded in the selected folder. Select

another folder or erase some of the messages (page 30).

Noise is heard.

An object, such as your finger, etc., accidentally rubbed or

scratched the unit during recording so that noise was recorded.
The unit was placed near an AC power source, a fluorescent

lamp or a mobile phone during recording or playback.
Plug of the connected microphone was dirty when recording.

Clean the plug.
Ear receiver/headphones plug is dirty. Clean the plug.

Recording level is low.

Set the microphone sensitivity to “H (high)” using the menu

(page 18).

Recording is interrupted.

The advanced VOR function is activated. Set VOR to “OFF”

(page 17).

Advertising
This manual is related to the following products: