Sony DCR-HC52 - Manual (Page 46)

46
Recording pictures from a VCR, etc.
Using an i.LINK cable (optional), you can record pictures from a VCR, etc., on a tape.
Be sure to insert a cassette for recording in your camcorder beforehand.
You can connect your camcorder to a VCR or an i.LINK-compatible device using the i.LINK
cable (optional).
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 12). Refer also to the instruction manuals supplied with the devices to be
connected.
When connecting your camcorder to
another device using an i.LINK cable, the
video and audio signals are transmitted
digitally, producing high quality pictures
and sound. Note that you cannot output
picture and sound separately.
1
Connect your VCR, etc., to your
camcorder with an i.LINK cable.
2
Insert a cassette into the VCR.
3
Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
4
Set your camcorder to recording
pause mode.
Touch t [PAGE3] t [REC
CTRL] t [REC PAUSE].
b Notes
• You cannot record pictures on your camcorder from a VCR that does not have an i.LINK
jack.
DV
i.LINK
: Signal flow
To i.LINK jack
To DV Interface (i.LINK)
i.LINK cable (optional)
AV device
with i.LINK
jack