Sony Data Projector VPL-MX20 - Manual (Page 57)

57
Specifications
Oth
e
rs
Specifications
Optical characteristics
Projection system
3 LCD panels, 1 lens, projection
system
LCD panel 0.63-inch XGA panel,
approximately 2,360,000 pixels
(786,432 pixels
× 3)
Lens 1.2 times zoom lens (powered)
f 18.19 to 21.87 mm/F1.65 to 1.8
Lamp 200 W Ultra High Pressure
mercury lamp
Projected picture size (measured diagonally)
30 to 150 inches
30 to 150 inches (auto focus
operation range)
Light output 2500 lumen
(When the Lamp Mode is set to
“High.”)
Throwing distance (When placed on the floor.)
30-inch: 0.86 to 0.99 m
(2.8 to 3.2 feet)
40-inch: 1.2 to 1.3 m
(3.9 to 4.3 feet)
60-inch: 1.8 to 2.0 m
(5.9 to 6.6 feet)
80-inch: 2.4 to 2.7 m
(7.9 to 8.9 feet)
100-inch: 3.0 to 3.4 m
(9.8 to 11.2 feet)
120-inch: 3.6 to 4.1 m
(11.8 to 13.5 feet)
150-inch: 4.5 to 5.1 m
(14.8 to 16.7 feet)
There may be a slight difference between the
actual value and the design value shown above.
Electrical characteristics
Color system NTSC 3.58 /PAL/SECAM/
NTSC 4.43 /PAL-M/PAL-N/
PAL60 system, switched
automatically/manually
(NTSC 4.43 is the color system used
when playing back a video
recorded in NTSC on a
NTSC
4.43 system VCR.)
Resolution 750 horizontal TV lines (Video
input)
1,024
× 768 dots (RGB input)
Acceptable computer signals
1)
fH: 19 to 80 kHz
fV: 48 to 92 Hz
(Maximum input signal resolution:
SXGA+ 1400
× 1050
fV: 60 Hz)
1)
Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.
Applicable video signals
15 k RGB/Component 50/60 Hz,
Progressive component 50/60
Hz, DTV (480/60I, 575/50I,
480/60P, 575/50P, 720/60P, 720/
50P, 1080/60I, 1080/50I),
Composite video
Input/Output
INPUT A HD D-sub15-pin, female
Analog RGB/component:
R/R-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative
(75 ohms terminated)
B/B-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
SYNC/HD: Composite sync input:
TTL level, positive/negative
Horizontal sync input: TTL level,
Positive/negative
VD: Vertical sync input: TTL
level, positive/negative
VIDEO Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
Network (VPL-MX25 only)
Wireless LAN:
IEEE.802.11.a/b/g
2)
2)
Some wireless networks cannot be used in
certain countries or areas.
USB (VPL-MX25 only)
USB TYPE A
General
Dimensions 273
Ч 45 Ч 206 mm (10 3
/ 4 Ч
1
13
/ 16
Ч 8 1
/ 8 inches) (w/h/d)
(without projecting parts)
Mass Approx. 1.7 kg (3 lb 12 oz)
Power requirements
AC 100 to 240 V, 2.9 to 1.2 A, 50/
60 Hz
Power consumption
VPL-MX25: Max 290 W
in standby (Standard): 11 W
in standby (Low): 2 W