Sony DAV-LF10 - Manual (Page 15)

Ge
tting Star
te
d
15 GB
Connect the supplied speaker system using the supplied speaker cords by matching the colors of the
jacks to those of the cords. For the surround speakers connect them to the surround amplifier that
receives the sound by wireless. Do not connect any speakers other than those supplied with this system.
To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.) on
page 36.
Connecting the subwoofer
Connect the system connector of the control unit to the SYSTEM CONNECTOR jack of the
subwoofer.
To insert the plug of the SYSTEM CONNECTOR cord, press and hold both sides of the plug.
Notes
• Do not handle the clear plastic panel when you move or operate the control unit as it may break.
• Before connecting/disconnecting the SYSTEM CONNECTOR cord, make sure the AC power cord (mains lead) is
disconnected from the wall outlet (mains).
Required cords
Speaker cords
The connector and the color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Step 1: Speaker System Hookup
IN VIDEO
PHONES
OPTICAL DIGITAL IN
IN
P B /C B P R /C R SCAN SELECT
INTERLACE SELECTABLE
Y
VIDEO
S VIDEO (DVD ONLY)
VIDEO DIR-T1
FM
75
COAXIAL
AM
IN
L L
AUDIO
R R
IN AUDIO
FRONT R CENTER FRONT L
COMPONENT VIDEO OUT ANTENNA
SPEAKER
SAT VIDEO
MONITOR OUTPUT
DIR-R4
(FOR SS-TSL10 , SS-CTL10)
SYSTEM CONNECTOR
FOR HCD-LF10
Subwoofer
SYSTEM CONNECTOR cord Control unit
(–)
(+)
color tube
(+)
(–)
continued