Sony DAV-LF10 - Manual (Page 90)

90 GB
Notes
• If your TV accepts progressive signals, connect
COMPONENT VIDEO OUT of the system to the TV
using a component video cord (not supplied), and set
progressive format.
• When [PROGRESSIVE] is selected in [SCREEN
SETUP], no signal is output from the MONITOR
OUTPUT jacks.
• If you set [COMPONENT OUT] in [SCREEN
SETUP] to [PROGRESSIVE] even though your TV
cannot accept the signal in progressive format,
picture noise may appears. In this case, return the
setting to interlace format (page 27).
• The display for confirming does not appears when
you select [INTERLACE].
Allows setting up Parental Control and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
For details on using the display, see “Using the
Setup Display” (page 87).
The default settings are underlined.
x VCD COLOR SYSTEM (Asian, Australian,
and Saudi Arabian models only)
Select the color system when you play a VIDEO
CD.
Notes
• You cannot change the color system of the disc itself.
• On Asian, Australian and Saudi Arabian models, you
can change the color system of this unit according to
the connected TV (page 26).
x PARENTAL CONTROL t (DVD VIDEO
only)
Sets a password and playback limitation level
for DVDs with playback limitation for children.
For details, see “Limiting playback for children
(Parental Control) (DVD VIDEO only)”
(page 74).
Custom Settings
(CUSTOM SETUP)
AUTO Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a DUAL
system, select AUTO.
PAL Changes the video signal of an
NTSC disc and outputs it in the
PAL system.
NTSC Changes the video signal of a PAL
disc and outputs it in the NTSC
system.
CUSTOM SETUP
OFF
PARENTAL CONTROL
TRACK SELECTION
MP3 DATA CD PRIORITY:
MM/DD/YYYY JPEG DATE:
OFF AUDIO DRC:
VCD COLOR SYSTEM