Samsung DVD-HD845 - Manual (Page 51)

ENG-51
Changing
Setup Menu
C H A N G I N G S E T U P M E N U
Note
• To exit the setup menu, press the MENU button.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
HDMI
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS,
MPEG), you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down sampling to On.
❶
Dolby/DTS Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.
Select Bitstream when connecting to a Dolby Digital and DTS Decoder.
Note
• There is no analog audio output when you play a DTS disc.
❷
Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
❸
PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,
all signals will be output without any changes.
Note
Even when PCM Down sampling is Off, some discs will only output down sampled audio through
the digital outputs.
00637S-DVDHD845 XAA2 8/9/05 8~59am Page 51