Electronic analogue clock (on some models only), Setting the time, Minute-minder – Smeg SDK380X-5 User Manual

Page 13: Instructions for the user, 3 electronic analogue clock (on some models only)

Advertising
background image

Instructions for the user

3.3 Electronic Analogue Clock (on some models only)


LIST OF FUNCTIONS

MINUTE-MINDER BUTTON

AUTOMATIC SWITCH-OFF TIMING BUTTON

TIME SETTING AND RESET

VALUE DECREASE BUTTON

VALUE INCREASE BUTTON

3.3.1 Setting the time
When the oven is used for the first time, or after a power blackout, the

display flashes on and off at regular intervals. Press the

key for 1/2

seconds to stop the display flashing and start setting of the current time.

Press the value modification keys

or

to increase or decrease by

one minute for each time a key is pressed.
Press one of the two value modification keys until the current time
appears. The clock will start from the time set 6/7 seconds after the last
key is pressed.

At the end of each programmed cooking operation, the clock gives 8
beeps, repeated 3/4 times at intervals of about 1 and a half minutes.
The beeps can be stopped at any moment by pressing any key.


3.3.2 Minute-minder

This function does not stop cooking but just triggers the beeps.

124

Advertising
This manual is related to the following products: