Samsung HT-DS420 - Manual (Page 9)

Press AUX on the remote control to select AUX 1 or AUX 2.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connect Audio In on the DVD player to Audio Out on the external analog component.
• Be sure to match connector colors.
1
2
SUBWOOFER REAR R FRONT R
CENTER REAR L FRONT L
IMPEDANCE
FRONT / CENTER / REAR : 4Ω SUBWOOFER : 4Ω
16
Example: Analog signal components such as a VCR or TV.
Connecting an External Analog Component
Audio Cable
If the external analog
component has only one
Audio Out, connect either
left or right.
15
CONNECTIONS
Press AUX on the remote control to select ‘DIGITAL IN’.
• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connecting External Components
Connect the Digital Input (OPTICAL) to the Digital Output on the external
digital component.
1
2
SUBWOOFER REAR R FRONT R
CENTER REAR L FRONT L
IMPEDANCE
FRONT / CENTER / REAR : 4Ω SUBWOOFER : 4Ω
DIGITAL OUT
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Connecting an External Digital Component
Optical Cable
(not included)