Sony CA-590 - Manual (Page 14)

14
Preparations
Preparations
Attaching the CA-590/590P to a BVP-E10/E10P/E10WS/E10WSP/E30/E30P/
E30WS/E30WSP Color Video Camera
When you attach the CA-590/590P to a BVP-E10/E10P/E10WS/E10WSP/E30/
E30P/E30WS/E30WSP Color Video Camera as shown below, the 68-pin
connectors on both units are automatically connected.
1
Attach the CA-590/590P to the rear of the color video camera.
Hook the upper part, then push the lower part in until it snaps into place.
2
Tighten the screw with a coin.
Removing a Camera Adaptor
Loosen the screw on the video camera until it stops, then remove the camera
adaptor while pushing the screw.
Tighten the screw.