Sony D-NF420 - Manual (Page 27)

Using the Radio
Listening to the Radio
You can enjoy FM and AM programs.
1
Press RADIO ON/BAND•MEMORY to
turn on the radio.
2
Press RADIO ON/BAND•MEMORY
until the band you want appears.
Each time you press the button, the
display changes as follows:
USA and Canadian models:
 FM  AM  TV  WB
Other models:  FM  AM
3
Press TUNE + or – to tune in the
station you want and adjust the
volume.
Turning off the radio
Press  •RADIO OFF.
Tuning in the station quickly
Press an hold TUNE + or – in step 3 until
the frequency digits begin to change on the
display. The CD player automatically scans
the radio frequencies and stops when it finds
a clear station.
Emphasizing the bass
sound
1 While listening to the radio, press
DISPLAY/MENU until the menu screen
appears.
2 Press  or  to select “SOUND,” then
press  /ENTER.
3 Press  or  to select “BASS,” then press
 /ENTER.
4 Press  or  to select “ON,” then press
 /ENTER to enter the selection.
Improving broadcast reception
For FM, extend the earphones cord.
Earphones
For AM, reorient the CD player itself.
Note
Keep the earphones connected to the  jack of the
CD player. The earphones cord works as the FM
antenna.
If it is hard to hear the FM/
TV/WB broadcast due to
interference from strong
radio waves
1 While listening to the radio, press
DISPLAY/MENU until the menu screen
appears.
2 Press  or  to select “OPTION,” then
press  /ENTER.
3 Press  or  to select “LOCAL/DX,” then
press  /ENTER.
4 Press  or  to select “LOCAL,” then
press  /ENTER.
Continued 
27
Using the Radio
D-NF420/NF421.GB.2-318-768-11(1)