Adjusting the picture, Adjusting the tracking, About the adaptive picture control (apc) function – Sony POWER TRILOGIC SLV-L89HF CL/CS/MX/VZ User Manual

Page 62

Advertising
background image

62

Additional Operations

Tracking meter

Adjusting the picture

Adjusting the tracking

Although the VCR automatically adjusts the tracking when playing a tape
(the

indicator flashes in the display window, then goes off), distortion

may occur if the tape was recorded in poor condition. In this case, manually
adjust the tracking.

Press TRACKING +/– to display the tracking
meter. The distortion should disappear as you
press one of the two buttons (the

indicator

lights up). To resume automatic tracking
adjustment, eject the tape and reinsert it.

About the Adaptive Picture Control (APC) function

The Adaptive Picture Control (APC) function automatically improves
recording and playback quality by adjusting the VCR to the condition of the
video heads and tape. To maintain better picture quality, we recommend
that you set APC to ON in the ADVANCED OPTIONS menu (with the APC
indicator in the display window lit). For details, see page 64.

APC playback

The APC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with APC.

APC recording

Whenever you insert a tape and first start recording, the VCR adjusts to the
tape using the APC function (the APC indicator flashes rapidly). This
adjustment is retained until the tape is ejected.

Notes
• Auto tracking adjustment cannot be guaranteed to work with tapes recorded in LP

mode on other VCRs.

• The APC function does not work if the tape speed is automatically changed from

the SP to EP mode during a timer recording when AUTO TAPE SPEED to ON in the
ADVANCED OPTIONS menu, unless the tape has been recorded in the EP mode
with the APC function.

• There is a delay of about ten seconds before the VCR actually starts recording while

the VCR analyzes the tape. To avoid the delay, first set the VCR to recording pause
(the APC indicator flashes slowly) and press r REC to have the VCR analyze the
tape (the APC indicator flashes rapidliy). After the APC indicator stops flashing,
press P PAUSE to start recording immediately.
If you want to start recording quickly without using the APC function, first set the
VCR to recording pause (the APC indicator flashes slowly) and press P PAUSE to
start recording.

NORMAL TRACKING

Advertising