Sony POWER TRILOGIC SLV-L89HF CL/CS/MX/VZ - Manual (Page 64)

64
Additional Operations
Changing menu options
1
Press MENU, then select ADVANCED
OPTIONS and press OK.
2
Press >/. to highlight the option to change, then press OK.
3
Press >/. to change the setting, then press OK.
To adjust SHARPNESS, press ?// and press OK.
4
Press MENU to return to the original screen.
Menu choices
Initial settings are indicated in bold print.
Menu option Set this option to
AUTO ANT SELECT •ON if your TV is connected only to VHF/UHF OUT on the
VCR. To play a tape, set the TV to the VCR channel
(channel 3 or 4).
•OFF if your TV is connected to both VHF/UHF OUT and
LINE OUT on the VCR. To play a tape, set the TV to the
VCR input.
AUTO STEREO* •ON to receive stereo programs.
•OFF to reduce noise. The sound changes to monaural.
TUNER AUDIO* •MAIN to record the main sound on both hi-fi and normal
audio tracks.
•SAP to record the SAP (Second Audio Program) sound on
both hi-fi and normal audio tracks.
APC •ON to switch on the APC (Adaptive Picture Control)
function and improve picture quality.
•OFF to switch off APC.
TAPE SELECT •AUTO when using a T-160 length tape or any tape shorter
than a T-140 length tape.
•180 when using a T-140 or T-180 length tape.
AUTO TAPE SPEED •ON to change the timer recording tape speed automatically
to the EP mode when the remaining tape length becomes
shorter than the recording time. To operate AUTO TAPE
SPEED, set TAPE SELECT correctly.
•OFF to keep the tape speed.
SHARPNESS L (Low) through H (High) to adjust the sharpness of the
picture. L to turn off the sharpness control.
* SLV-L69HF MX, L72HF PA/PC, L79HF CL/CS/VZ, L89HF CL/CS/MX/VZ and
X66HF MX only
SELECT
SET
QUIT :
:
:
ADVANCED OPTIONS
O K
MENU
n
n
N RETURN
AUTO ANT SELECT
AUTO STEREO
TUNER AUDIO
TAPE SELECT
AUTO TAPE SPEED
SHARPNESS
APC
ON
ON
MAIN
ON
AUTO
ON
L H