Samsung BHM-1008 - Manual (Page 21)

20 Storing, recalling, and erasing measurement data
Storing, recalling, and erasing
measurement data
Storing data
After each measurement, the systolic and diastolic rates,
pulse rate and the time & date will be automatically stored.
* The memory holds data for the latest 99 measurements. If
more than 99 measurements are entered, the memory will
automatically clear out the oldest data.
Recalling data
a. Press the "MEMORY" button to get your stored memory
data.
* If there is no data in the memory nothing will
appear.
* If there is data in memory, the first reading will
be an average of all the readings in memory
(systolic and diastolic pressure and pulse rate).
b. Press the "MEMORY" button again and the lat-
est recorded set of measurements will appear along with
the recording time and date.
c. Press the "Memory" button to read the next set of stored
data. The data displayed starts with the most recent read-
ing and continues backwards to the oldest.