Snell Acoustics XA 2500 - Manual

143 Essex Street
Haverhill, MA 01832
978-373-6114
phone
978-373-6172 fax
Covered by patents issued and or
pending. Specifications subject to
change. ©2002 Snell Acoustics.
XA
2500
Spectr Spectr Spectr Spectr Spectral Contr al Contr al Contr al Contr al Control ol ol ol ol
An array of switches
compensates for perforated
screens and other
installation conditions.
Frequency Response
40Hz-24kHz ±3dB anechoic
Recommended Amplifier Power
150 to 600 watts
Impedance
Nominal 4 ohms, minimum 3 ohms
Sensitivity
88dB SPL (2.83v at 1m)
Tweeter
1-inch (25mm) titanium dome
tweeter .
Midranges
Two 4
1 / 2 -inch (110mm) mounted in
separate enclosure
SPECIFICATIONS
Bass Units
Two 8-inch (210mm) with black
anodized aluminum cones.
Grille
Cloth-covered MDF frame
Max Dimensions (HxWxD)
Horizontal: 32 x14 x 13
1 / 2 in.
Vertical: 32 x14 x 13 1 / 2 in.
Weight (each)
Shipping: 88 lbs. (40 kg)
Net: 75lbs. (34kg)
Finish
Black Painted MDF. Other veneers and
finishes available at extra cost.
A NEW REFERENCE FOR HIGH-END HOME THEATER
The Snell XA2500 Is the driver set and crossover from the XA 2900, Snell’s award
winning Reference LCR, mounted in a handmade utility enclosure. The result is an
LCR that approaches the performance levels of its Reference stablemate at less
than half the price. By teaming the best of loudspeaker design, and innovation
with a 3/4 MDF cabinet and Snell’s highly damped three part baffle, Dr. Joseph
D’Appolito and his team are able to achieve remarkable bandwidth, output, and
dimension when built into dedicated home theaters and screening rooms.
Hand built by Snell in Peabody, Ma, The XA 2500 uses all the parts from the XA
2900, except for the sophisticated multilayer enclosure, including the 8-inch
aluminum cone woofers, 4.5-inch midranges and 1-inch pure titanium tweeter.
In place of the Reference cabinet, the XA 2500 borrows from the XA 1900thx, by
employing a traditional utility cabinet, with a multilayer baffle of two layers of
dense MDF sandwiching a damping layer of 1.5mil neoprene. These cabinet
details are what helped garner awards for both the XA 2900 and XA 1900thx
Featuring the eXpanding Array (XA), a unique driver arrangement developed from
months of computer modeling, the XA 2500 assures extremely flat response
directed to the listening area, while quieting the floor and ceiling reflections
that bounce back to the listener as distortion. These optimum dispersion
characteristics are enhanced by the use of the drivers chosen for the $25,000 XA
Reference Tower. Together they provide the maximum in output, power han-
dling, bandwidth, and accuracy.
The highly detailed crossover, also from the XA Reference Tower, seamlessly
combines all elements. Innovatively, four switches are employed to “tune out”
distortions induced by typical installation conditions. Notably, the Boundary
Switch that tunes for flattest response, whether the speaker is located in free
space, near a rear wall, or on the floor. And, the Upper Treble Switch that
accurately compensates for the loss of treble when mounting the XA 2900
behind perforated film screens.
For applications demanding movie theater dynamics and output while preserving
the detail and nuance in music, the XA 2500 exceeds all expectations.
Available in both horizontal and vertical configurations.
XA2500
LCR FOR
SCREENING ROOMS &
HIGH END THEATERS