Listening to the radio – Sony CMT-L1 User Manual

Page 16

Advertising
background image

16

GB

Other operations

To

Tune in a weak
station

Cancel presetting

Change the preset
number

To change the AM tuning interval

(not applicable on the European

model)

The AM tuning interval is factory-preset to 9 kHz (or
10 kHz for some areas). To switch the AM tuning
interval, tune in any AM station first, then turn off the
system. Pressing and holding down FUNCTION,
turn the system back on. When you change the
interval, all the AM preset stations are erased. To
change back to the original interval, repeat the same
procedure.

Tips

• The preset stations are saved in the system’s

memory for about a day even if you disconnect the
power cord or a power failure occurs.

• You can label the preset stations (see page 17).
• To improve the reception, adjust the supplied

antennas or connect an external antenna.

Listening to the radio

You can listen to a radio station either by
selecting a preset station or by manually tuning
in a station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 15).

1

Press TUNER/BAND to select “FM” or
“AM”.

2

Press PLAY MODE/TUNING MODE
repeatedly until “PRESET” appears in
the display.

3

Press TUNING + or – repeatedly to
select the desired preset station (or
station name

*

or RDS station name

**

).

* The station name appears only if you have

labelled the station (see “Labelling the preset
stations ” on page 17).

** European model only.

To select a desired preset number

using the numeric buttons on the

remote

Press numeric buttons instead of performing
step 3.

To enter preset number over 10, press >10 and
enter the corresponding digits. To enter 0,
press 10/0 instead.

Example:

To enter preset number 20, press >10, then 2 and
10/0.

Listening to a non-preset
radio station

— Manual Tuning

1

Press TUNER/BAND to select “FM” or
“AM”.

2

Press PLAY MODE/TUNING MODE
repeatedly until “AUTO” and “PRESET”
disappear from the display.

3

Press TUNING + or – repeatedly to tune
in the desired station.

Tips

• To improve the reception, adjust the supplied

antennas or connect an external antenna.

• If there is static during an FM broadcast, press FM

MODE on the remote until “MONO” appears in the
display. The broadcast will no longer be in stereo,
but the reception will improve.

• In step 2, press PLAY MODE/TUNING MODE

repeatedly until “AUTO” appears in the display,
and then press TUNING + or –. The frequency
indication changes and the scanning stops when the
system tunes in a station (Automatic Tuning).

Do this

Follow the procedure
described in “Setting presets
through manual tuning”.

Press MENU/NO on the
remote in step 5 or 6.

Start over from step 1.

Presetting radio stations (continued)

Advertising