Sony WM-EX562 User Manual

Cassette player, Wm-ex562

Advertising
background image

I

I

3-860-970-61(1)

Cassette Player

Operating instructions

WM-EX562

Sony Corporation © 1998

Printed in Malaysia

WALKMAN is a registered trademark of Sony Corporation.

House Current

(see Fig. A-c)

Connect the AC power adaptor
AC-E15HG (not supplied) to the
DC IN 1.5V jack and to the wall
outlet. Do not use any other AC
power adaptor.

Specifications for AC-E15HG differ
depending on the area of purchase.
Check your local voltage and the
polarity of the plug before
purchasing.

Connecting the
Headphones/
Earphones

(see Fig. B)

1

Connect the headphones/
earphones to

2REMOTE.

2

Wear the ”L” marked side to
the left ear and the ”R” marked
side to the right ear.

Releasing HOLD

(see Fig. C)

The HOLD function locks the
Walkman and the remote control
separately to prevent them from
operating when you accidentally
press a button. Unlock it before
operating.

1

Slide HOLD in the opposite
direction of the arrow on the
Walkman, or slide HOLD on
the remote control.

To lock the Walkman
Slide HOLD in the direction of the
arrow on the Walkman, or slide
HOLD on the remote control so
that the HOLD indicator turns
yellow.

z

Operating the
Walkman

Playing a Tape

(see Fig. D-a)

The Auto tape selector
automatically selects the tape
(normal (TYPE I), CrO

2

(TYPE II)

or metal (TYPE IV)) for playback.

1

Insert a cassette.

2

Press

ϥREPEAT to start

playing and then adjust the
volume.

When adjusting the volume on
the Walkman

Set the VOL control on the remote
control at maximum.

When adjusting the volume on
the remote control

Set the VOLUME control on the
Walkman to around 6.

To

Press (see
Fig.
D-b)

Play the other side

ϥREPEAT

during playback

Stop playback

p

Fast forward

FF during stop

Rewind

REW during
stop

Repeat the track

ϥREPEAT

you are listening to

for two seconds

(Repeat Single

or more during

Track function)

playback
To stop a
single repeat,
press it again
.

Find the beginning

FF once/

of the next track/

repeatedly

succeeding 3 tracks

during

(AMS*)

playback

Find the beginning

REW once/

of the current track/

repeatedly

previous 2 tracks

during

(AMS)

playback

Play the same side

REW for two

from the beginning

seconds or

(Auto Rewind

more during

Play function)

stop

Play the other side

FF for two

from the beginning

seconds or

(Skip Reverse

more during

function)

stop

* Automatic Music Sensor

Note on Beeps during AMS
operations

• When finding the beginning of the

next 3 tracks during AMS
operations, beeps “• – – –” (beep
followed by three long beeps) are
emitted repeatedly. Likewise, when
finding the beginning of the
previous 2 tracks, beeps “•• – – –”
are emitted repeatedly. While the
remaining tracks are reduced, the
number of long beeps are reduced
accordingly.

Note on AMS, REPEAT Single
Track

• To operate the AMS and the

REPEAT Single Track functions, you
need a blank of 4 seconds or longer
between the tracks. Therefore, if
there is noise between the tracks,
these functions will not detect the
blank and will not operate. Likewise,
if the recording level is moderately
low within a track, these functions
may inaccurately operate.

Polarity of
the plug

(turn over)

A

Welcome!

Thank you for purchasing the Sony
WM-EX562 Cassette Player.
Some features are:
• You can enjoy low bass sounds by

the powerful headphone.

• You can choose from 2 different

emphasizing tones: MB (MEGA
BASS) and GRV (GROOVE) to
adjust to your favorite sound.

• AMS (Automatic Music Sensor)

function that searches the
beginning of the current and 2
previous tracks, and succeeding 3
tracks at high speed.

• Repeat Single Track function that

enables play of your favorite
single track repeatedly for your
convenience.

• AVLS (Automatic Volume Limiter

System) function that moderates
the maximum volume level.

• Useful remote control.

z

Getting Started

Preparing a Power
Source

Choose the dry battery or house
current as the power source.

Dry Battery

(see Fig. A-a)

1

Slide and open the battery
compartment lid, and insert an
R6 (size AA) dry battery (not
supplied) by matching the +
and – on the battery to the
diagram inside the battery
compartment.

When to replace the battery
(see Fig.
A-b)
Replace the battery with a new one
when the BATT lamp dims.

Battery life (Approx. hours)

(EIAJ*)

Sony

Sony

alkaline

R6P (SR)

LR6 (SG)

Tape playback

29

8

* Measured value by the standard of

EIAJ (Electronic Industries
Association of Japan). (Using a Sony
HF series cassette tape)

Note

• The battery life may shorten

depending on the operation of the
unit.

For maximum performance we
recommend that you use an alkaline
battery.

Notes

• Do not charge a dry battery.
• When the battery is replaced the

setted functions will be cancelled,
the unit will return to the factory
settings.

• When you do not use the Walkman

for a long time, remove the battery
to avoid any damage caused by
battery leakage and subsequent
corrosion.

English

b

a

BATT lamp

c

C

D

HOLD

FF

ϥREPEAT

p

REW

b

a

OPEN

ϥREPEAT

VOLUME

B

2REMOTE

Owner’s Record

The model number is located at the front
and the serial number is located inside
the tape holder. Record these numbers in
the space provided below. Refer to them
whenever you call upon your Sony
dealer regarding this product.

Model No. WM-EX562

Serial No.

INFORMATION

This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause

harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet

on a circuit different from that to which
the receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.

For the customers in the USA

HOLD

VOL

ϥREPEAT

p

ϥREPEAT

FF

REW

HOLD
indicator

Advertising