Sharp AR-407 - Manual (Page 120)

7-8
CHAPTER
7
Using the document glass
1 Set the original on the document glass with the corner
to be stapled to the upper right.
● Copy from the last page to the first page.
● If the number of copies in one set is more than 50 for
A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for B4 or
A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be
stapled.
● The stapling position shown in the left figure is the factory
default position.
2 Press the OUTPUT key.
3 Press the “STAPLE SORT” key on the touch panel.
4 Select the desired stapling position.
● The AR-FN1N finisher has three selectable stapling positions as
shown below.
Stapling position
AUTO
EXPOSURE
OPTIONAL EQUIPMENT
Finisher (AR-FN1N)
FINISHER (AR-FN1N)
OPY.
SORT
STAPLE
SORT GROUP
OK
READY TO COPY.
OUTPUT
TOP TRAY
OFFSET
SORT OFFSET
TRAY
STAPLE
SORT GROUP
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4