Image editing functions – Sharp AR-407 User Manual
Page 60
3-26
CHAPTER
3
IMAGE EDITING FUNCTIONS
SPECIAL FUNCTIONS
Image editing functions
7
Select a type of border line.
●
Select the solid line, broken line or no border line.
8
Press the upper “OK” key.
9
Make all other desired copier selections and enter the
desired number of copies.
●
If the required area of the originals is not included on the copies,
select a proper reduction ratio.
10
Press the START (
) key.
●
If the document feeder is used, scanning of originals and copying
will start.
●
If the document glass is used in the SORT mode, proceed to the
next step.
11
Replace the finished original with the next original after
the START (
) key indicator lights up, and then press
the START (
) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
●
Copying will start at this time.
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the REPEAT COPY function, select the REPEAT
COPY function again and press the “CANCEL” key.
4
16
BORDER LINE
CANCEL
OK
OK
1
2
3
4
5
6
7
8
9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO IMAGE
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
A3
4
16
BORDER LINE
CANCEL
OK