Speco Technologies HTINT650S User Manual

Speco Technologies Safety

Advertising
background image

NOTES

1. You can install the camera indoors or outdoors.
2. Be careful not to scratch the lens or dome cover.
3. Use 1Amp power supply at 12V DC or 24V AC.

FEATURES

1. IP67 (Waterproof)
2. Construction

Body : Aluminum, Dome : Polycarbonate

3. (Optional) Wall, Ceiling and pole mounts available
4. 25M range visible in total darkness with 24pcs of

IR LEDs (depends upon scene reflection)

5. Side control board for easy function adjustment
6. Dual power (12V DC or 24V AC) operation

DIMENSION

HOW TO INSTALL

1. Camera installation

(1) Fix the camera with the supplied screws on

ceiling or wall mount.

(2) Please refer to '3. Camera angle adjustment' regarding

adjust camera angle.

(3) Lens adjustment

After opening the LED cover,
①By turning the "Tele-Wide" knob, you can access a

range of focal lengths within specified limits.

②By turning the "Near-Far" knob, you can set the

focus toward an object.

(4) Reassemble the camera.

<Ceiling mount>




<Wall mount>

2. Pipe application

(1) Remove the screw for fixing a cable on the bottom

of the base.

(2) Open the DOME COVER.
(3) Remove the TAP COVER and place the cables there.
(4) After distributing cables, use the TEPLON tape to

wipe the pipe.

(5) Attach the pipe to the base.
<Caution> If you don't wipe TEFLON tape on pipe, it
might cause water intrusion issues.

3. Camera angle adjustment

(1) Pan adjustment : Grasp the disk of camera and

adjust direction to the right or left(-160˚~ 190˚)

(2) Tilt adjustment : Grasp the LED cover of camera and

adjust direction to up or down(6˚~ 90˚)

(3) Roll adjustment : Grasp the camera holder and

then rotate(-178˚~ 178˚)

<Caution> If you try to adjust the camera out of limited
angle, it might cause damage to camera.

HTINT650S, HTINT650W

SPECIFICATION

Model No.

HTINT650S, HTINT650W

Image Sensor

1/3" SONY SUPER HAD CCDⅡ

Effective Pixel

768(H) X 494(V) PIXEL

Cell Size

6.35㎛(H) X 7.4㎛(V)

Scanning System

2 : 1 Interlace

Sync. Type

Internal / Line lock(24V AC)

OSD Multi-language
WDR Set

SSDR / BLC / HLC / OFF

Resolution

Color : 600 TV-Line, B/W : 700 TV-Line

S/N Ratio

52dB(AGC OFF, Weight ON)

Min. Illumination

LED ON : 0 Lux(25M Range)
LED OFF : 0.0005 Lux(Color Sense-up),
0.0002 Lux(B/W Sense-up)

Color Temp.

ATW(1,700°K ~ 11,000°K) /
AWC / MANUAL / OUTDOOR / INDOOR

Shutter

1/60 ~ 1/120,000sec

Intensifier

AUTO / FIXED / OFF(x2 ~ x512 selectable)

Gain Control

LOW / HIGH / OFF

Speco DNR

OFF / ON(1 ~ 32 Level adjustable)

V Motion

ON / OFF(8 Zone, Alarm output)

Privacy

ON / OFF(12 Zone)

Mirror

H / V / BOTH / OFF

Clarity

ON / OFF(Level adjustable)

D&N

ICR(COLOR / Black&White / AUTO)

Stabilize

ON / OFF

Digital Zoom

ON(x16) / OFF

DPC

256 point(Even 128 point, ODD 128 point)

Power Supply

Regulated 12V DC or 24V AC

Current Consumption 150mA(LED OFF), 500mA(LED ON)
Operation Temp.

-20 to 122

Dimension Ø150

x

98.6(H)mm

Weight 1.76Ibs

※The specification is subject to change without any

prior notice to improve the quality.

FUNCTIONS

1. Setup for camera functions

ENTER :

- Push the lever : Used to access the menu and

confirm selection.

- Push the lever for one second : Open the menu or

close the menu.

Up, Down :

Used to move the cursor to up or down.

Left, Right :

Used to move the cursor to left or right and change
the value.

EXT-VIDEO :

Extra video output terminal for installation.
Plug your test monitor in here. The cable is option.

Advertising
This manual is related to the following products: