Samsung SP-A600B - Manual (Page 32)

4-1 Troubleshooting
4 Troubleshooting
4-1 Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.
Symptoms
Troubleshooting
Installation
and Con-
nection No Power. Check the power cable connections.
I want to install my projector on the ceiling. The ceiling installation support is sold separately. Contact your
local product distributor.
External Source can not be selected. Be sure that the connection cable(s) is properly connected to
the proper port. If the device is not connected properly, it can
not be selected.
Menu and
Remote
Control Remote control does not work. Be sure that the proper external source is selected.
Check the remote control battery. If there is something wrong
with it, replace it with a new battery of the recommended size.
Be sure to aim the remote at sensor on the front or back of the
unit and at a distance of no more than approximately 23 feet(7
m). Remove any obstacles between your remote control and
the product.
Direct light from 3-way light bulbs or other lighting devices on
the remote sensor of the projector may affect the sensitivity
and cause the remote control to malfunction.
Check if the remote control battery compartment is empty.
Check whether the LED indicator on the top of the projector is
turned on.
I cannot select a menu. Check if the menu is displayed in gray. A gray-colored menu is
unavailable.