Sundance Spas ALTAMAR 880 - Manual (Page 19)

Page 13
880 SERIES
7. Select the power supply entrance you want to use (Figures A-B,
pages 13-14) and remove the short cabinet panel from the front of
the hot tub, then feed cable through the large opening provided on
the bottom of the control box.
8. Connect wires, color to color, on terminal blocks TB1 and TB3
(Figure D). TIGHTEN SECURELY! All wires must be hooked up
securely or damage could result.
9. Install control box door and reinstall the cabinet side panels.
Figure A (Maxxus equipment Area)
SENTRY
SPA CONTROLLER
5
3
4
1
11
9 9
10
2 2
7
6
12
13
8
Flow 14
Note: Pump, ozone, and drain locations may vary
1. Sentry Control Box
2. Power Supply Entrance(s)
3. Jets Pump #1
4. Jets Pump #2
5. Jets Pump #3
6. Blower
7. Heater
8. Hot Tub Drain (Removable
External Drain Cap)
9. Pump Drain Plug(s)
10. Filter/Circulation Pump
11. Optional Subwoofer Behind
Bulkhead (Models with Audio
Option Only.)
12. Control Panel
13. Ozone Injector
14. Optional CD Ozonator