Sundance Spas ALTAMAR 880 - Manual (Page 63)

Page 57
880 SERIES
14.5 Maintaining the Hot Tub Cabinet
The hot tub cabinet require little or no maintenance of any kind. To clean,
wipe cabinet with a clean towel and mild detergent soap solution.
CAUTiON: Never spray cabinet with a high pressure garden
hose for any reason since this action may induce an electri-
cal short in the hot tub’s electrical equipment.
14.6 Vinyl Cover Care And Maintenance
Using the Sundance insulating spa cover anytime the spa is not in
use will significantly reduce your operating costs, heat-up time and
maintenance requirements. To prolong the life of the cover, handle it with
care and clean it regularly. Below are the care instructions.
A. To Clean and Condition the Vinyl Cover
1. Use a garden hose to loosen debris and dirt.
2. Using a large sponge or a soft bristle brush, use diluted or mild soap
and scrub the vinyl top. Rinse clean and do not allow soap to dry on
cover. Do not use soap on the underside of the cover.
3. Please check with your Sundance Spa Dealer for recommended
cover care and conditioning products. Condition using non-petroleum
based conditioners to keep the vinyl supple and threads/stitching
from drying out. Do not use solvents, abrasive cleaners or strong
detergents. Do not use products that contain silicone or alcohol.
1 2
Place both hands on
pillow with thumbs as
shown.
Press inward with
thumbs to curl pillow
lip inward so you can
grab it with fingertips.
3 4
5
Flex pillow lip inward
2-3" to get a good
grip on the ends.
Gently pull outward on
pillow to release mounting
stud from receptacle on
spa shell.
Wash pillow(s) in a mild detergent soap and warm water solution. Never machine wash your pillows
or attempt to clean them with a cleaning agent!
6 To reinstall pillows: Simply align pillow over mounting stud receptacle, then gently push inward to
snap in place.