Samsung HT-DL80D - Manual (Page 8)

GB GB
• The “WAIT” message that appears on the display for about seven to eight seconds when
turning on the power or selecting a DVD function indicates a stabilization period for
optimizing the condition of your DVD player. While the message is being displayed, other
buttons remain inactive.
• When the power is not turned on, press down the Stop ( ) button on the main unit for
over 5 seconds.
The product will be initialized to its optimum state.
• Certain operational features such as the Speaker mode, Test tone, Volume, etc.
will not be displayed on the TV screen.
Before Using the DVD Player Connecting your System to the Power Supply
14
Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions
carefully before use.
DVD
Prepa-
rations
before
use
Turn on the power
to your DVD player
and TV.
1
Select a video mode by
pressing the TV/VIDEO
button on the TV.
2
Press the DVD button
to select the DVD input
function.
3
13
The main lead must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.
AUX IN
VIDEO
VIDEO OUT
ANTENN A S-VIDEO
SPEAKERS SPEAKERS
AV OUT
L
R
AUX IN
VIDEO Y/C
COMP.
VIDEO OUT
ANTENNA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
S-VIDEO
AM R-FRONT-L R-REAR-L
WARNING : SHOCK HAZARD - DO NOT OPEN. A V I S : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
WOOFER CENTER
6 6 6 3
TV System Selection
With the power turned off, press and hold (for more than 2 seconds)
the button on the main unit.
• The display on the main unit switches as follows: NTSC ➔ PAL ➔ SECAM (OPTION).
Then release the button to select the system of your TV.
• Different countries use different types of TV broadcast systems, video, audio and
channel systems.
Example : The player cannot playback NTSC-encoded DVD with PAL-TV.
Listening on headphones HT-DL80D only
Use headphones for private listening pleasure (not supplied).
Connect the headphones to the HEADPHONES jack of the front panel.
• No sound is produced from the speakers.
• To prevent hearing damage, do not raise the volume level excessively when using headphones.
HEADPHONE jack