Lan card – Sony PEGA-WL100 User Manual

Page 32

Advertising
background image

32

Performing a HotSync Operation via a
Network with a Wireless LAN Card

This Wireless LAN card can be used in various ways. For example,
you can perform a HotSync operation with a Windows computer via a
wireless LAN. Follow the procedures below.

Preparing your computer

1 Click the

icon in the Windows task tray (bottom-right corner

of the taskbar) and select [Network] from the shortcut menu.

2 Click the

icon in the Windows task tray again and select

[Setup] from the shortcut menu.
The [Setup] screen is displayed.

3 Click the [Network] tab, then click the check box next to the

user name for HotSync.

4 Click [TCP/IP Settings], and enter a Subnet Mask.

5 Click [OK].

6 Connect your CLIÉ handheld to your computer, and perform a

HotSync operation.
The computer information is transferred to your CLIÉ handheld.
When you perform a HotSync operation via a wireless LAN, your
CLIÉ handheld identifies the computer based on the information
transferred.

Preparing your CLIÉ handheld

Follow the steps below to set up your CLIÉ handheld for a HotSync
operation via a wireless LAN.

1 Select [Wireless LAN] in [Service] on the [Network] screen of

[Preferences], and select a profile name for a HotSync operation
on the [Wireless LAN details] screen.
For details, see the Steps 1 to 6 of “Connecting your CLIÉ Handheld
to a Wireless LAN” on pages 21 and 22.

Advertising
This manual is related to the following products: