Sony CDX-CA600 - Manual (Page 12)

12
Locating a disc by name
— List-up (For a CD unit with the CUSTOM
FILE function or an MD unit)
You can use this function for discs that have
been assigned custom names*
1 or for CD TEXT
discs* 2 .
* 1 Locating a disc by its custom name: when you
assign a name for a CD (page 11) or an MD.
* 2 Locating discs by the CD TEXT information:
when you play a CD TEXT disc on a CD unit with
the CD TEXT function.
1
Press (LIST/PTY) momentarily.
The name assigned to the current disc
appears in the display.
2
Press (LIST/PTY) repeatedly until you
find the desired disc.
3
Turn the SEEK/AMS control dial to play
the disc.
Notes
• Once a disc name has been displayed for 5
seconds, the display goes back to its normal
playback mode.
• The track names are not displayed during MD
playback.
• If there are no discs in the magazine, “NO DISC”
appears in the display.
• If a disc has not been assigned a custom file, “NO
NAME” appears in the display.
• If the disc information has not been read by the
unit, “NOT READ” apppears in the display. To
load the disc, first press the number button, then
choose the disc that has not been loaded.
• The information appears only in upper cases.
There are also some letters which cannot be
displayed (during MD playback).
Viewing the Disc Memo
As a display item, the Disc Memo always takes
priority over any original CD TEXT
information.
To Press
View (DSPL) during CD/
CD TEXT disc playback
Erasing the Disc Memo
1
Press (SOURCE) repeatedly to select
“CD.”
2
Press (MODE) repeatedly to select the CD
unit storing the Disc Memo.
3
Press (LIST/PTY) for 2 seconds.
4
Press (DSPL) for 2 seconds.
5
Turn the VOL control dial to select the
disc name you want to erase.
6
Press (SEL) for 2 seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (LIST/PTY) for 2 seconds.
The unit returns to normal CD play mode.
Notes
• When the Disc Memo for a CD TEXT disc is
erased, the original CD TEXT information is
displayed.
• If you cannot find the Disc Memo you want to
erase, try selecting a different CD unit in step 2.