Sharp FP-P60CX - Manual (Page 17)

ENGLISH
FRANÇAIS
ESPAÑOL
E-15
To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to
remain, they may become hard to clean.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
Do not use volatile fluids
Benzene, paint thinner, polishing powder, etc., may damage the surface.
Do not use detergents
Detergent ingredients may damage the unit.
Keep the unit away from water
• In case of washing, use a soft brush etc. and cold/warm water.
• Metal brushes or scrub brushes may cause damage.
• After washing, leave it in the shade until it is dry. Then place it
back to the frame.
• Never wash or clean the True HEPA Filter using the nozzle of
a vacuum cleaner directly.
This will greatly decrease the performance of the filters.
CARE AND MAINTENANCE
To maintain optimum performance of this air purifier, please clean the unit including
the sensor and filters periodically.
When cleaning the unit, be sure to unplug the power cord, and never handle the plug
with wet hands. Electrical shock and/or bodily injury may occur as a result.
MAIN UNIT
ODOR SENSOR
Opening of odor
sensor
Remove the Front Panel, Clean the surface of the Pre-Filter lightly with a vacuum cleaner.
If it is very dirty remove it from the Filter Frame and wash it.
FILTER CLEANING
NOTE
The sensitivity of the sensor will become
unstable if the odor sensor is dirty or
blocked. Remove dust from the surfaces
of the sensor openings using a vacuum
cleaner.
Care Cycle 2 months
Care Cycle 1 month
Care Cycle 2 months