Sharp GB201 - Manual (Page 37)

34
HR-GB201
2-6
8
10
14
30
34
38
44
04/5/18 HR-GB201_UK.fm HR-GB201 9JCG5230100042
Recor
d
ing fr
om CD
-Re
c
o
rding fr
om a
CD pla
y
e
r-
Recording from a CD player
" Playback sound-actuated recording
Music from CDs is recorded as MP3 files.
The unit starts recording when a signal from LINE IN
socket is detected (Synchronised recording).
1
Connect a CD player to the main unit.
2
Turn on the unit (see page 8).
3
Hold down the REC button for 2 seconds or
more.
4
Begin playback on the CD player.
! Recording will begin automatically.
To interrupt recording:
! When the CD player is stopped, the music data num-
ber increases by one and the unit will enter the syn-
chro recording pause mode. When playback is
resumed, recording will also resume.
! If a silence lasts for 2 seconds or more, the music data
number increases by one and recording will be
paused (number does not increase for approximately
5 seconds after recording starts). When the unit
receives sound again, recording automatically starts.
! A new music data is created when recording resumes.
To stop recording:
Press the button.
Notes:
! To cancel synchro recording, see page 40.
! You can change the recording quality (see page 40).
To audio output sockets
Audio cable
(commercially available)
CD player
00 00 00