Connecting the ac power cord, Performing initial setup operations – Sony STR-DE697 User Manual

Page 17

Advertising
background image

Gettin

g

Star

ted

masterpage:Right

lename[E:\SEM_Janet\Data_STR-

DE697_revised\J9040016_4252272312DE697GB\4252272312\GB03CON_STR-DE697-
CEL.fm]

model name1[STR-DE697]

[4-252-272-31(2)]

17

GB

Connect the AC power cord to a wall outlet.

* The configuration, shape and number of AC outlets

vary according to the area code.

Notes

• The AC OUTLET(s) on the rear of the receiver is a

switched outlet, which supplies power to the
connected component only while the receiver is
turned on.

• Make sure that the total power consumption of the

component(s) connected to the receiver’s AC
OUTLET(s) does not exceed the wattage stated on
the rear panel. Do not connect high-wattage
electrical home appliances such as electric irons,
fans, or TVs to this outlet. This may cause a
malfunction.

Performing initial setup
operations

Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.

1

Press ?/1 to turn off the receiver.

2

Hold down ?/1 for 5 seconds.

“PUSH” and “ENTER” appears in the
display alternatingly.

3

Press ENTER.

“CLEARING” appears in the display for a
while, then “CLEARED” appears.
The following are reset to their factory
settings.
• All settings in the SET UP, LEVEL, EQ

and CUSTOMIZE menus.

• The sound field memorized for each

input and preset station.

• All sound field parameters.
• All preset stations.
• All index names for inputs and preset

stations.

• MASTER VOLUME –/+ is set to “VOL

MIN”.

• Input is set to DVD.

4: Connecting the AC
power cord

OUND

NT A

CENTER

L

L

+

ND BACK L

+

AC OUTLET

AC OUTLET*

b

To a wall
outlet

AC power cord

GB01COV_STR-DE697-CEL.book Page 17 Friday, April 2, 2004 12:21 PM

Advertising