Sharp MD-MT821 - Manual (Page 24)

n APSS
(Auto Proaram Search system
APSS automatically locates the beginning
of any track.
To move to the beginning of the
next track:
Move the shuttle switch tom during play-
back.
To re-start the track being played:
Move the shuttle switch to during play-
back.
To skip a number of tracks at one time,
move the shuttle switch to or re-
peatedly until the desired track number is
shown.
To begin playback at a desired track, move
the shuttle switch to
or while in the
stop mode to select the track number. Then
press the button.
Note:
When the first track is selected and the
shuttle switch is moved to the last
track on the disc will be located. When
the last track is selected and the shuttle
switch is moved to
the first track
will be located.
Cue and review
1
Load a and begin playback.
2 Move and hold the shuttle switch at
for audible fast forward, or move and
hold the shuttle switch at for audible
fast reverse.
3
Normal playback will resume when the
shuttle switch
or is released.
Notes:
When the end of the last track is reached
during fast forward, the unit will enter the
pause mode. When the beginning of the
first track is reached during fast reverse,
the unit will enter the playback mode.
When the unit is in the all track repeat
mode, the search will wrap around from
the last track to the first, or vice versa.
Depending on the contents recorded on
a MiniDisc, some sounds may be
skipped while cueing and reviewing.
To search very quickly:
When fast forward or fast reverse is used
while in the pause mode, the search will be
performed more quickly than during audible
fast forward or fast reverse playback.
In this mode, no sound is heard. There-
fore, you should refer to the time dis-
play.
When you lift your finger, the unit will re-
enter the pause mode.
23