Sharp MD-MT821 - Manual (Page 26)

To check the remainino
recording time and the total
playing time
While in the stop mode, press the DISP
button (Remote control: press the DISPLAY
shuttle switch).
Each time the button is pressed, the dis-
play will change as follows:
Remaining recording time
Total playing time
Note:
If character information was not originally
recorded on the MiniDisc, nothing will be
displayed.
n To check the elapsed time
and remaining time of the
track
During playback, press the DISP button
(Remote control: press the DISPLAY
shuttle switch).
Each time the button is pressed, the dis-
play will change as follows:
Track name
0:02
_ Elapsed playback time
track -3:43
Remaining play time
To display the playing time of an
individual track:
While in the stop mode, move the shuttle
switch to or to display the track
number and track name, and then press the
DISP button (Remote control: press the
DISPLAY shuttle switch) to display the play-
ing time for that track.
Move and hold the shuttle switch to
display the playing time of the next track.
2 5