Samsung HT-SK6 - Manual (Page 20)

SETUP
38 37
Dolby Pro Logic II Effect Function
Effect
• When playing a DVD encoded in two or more channels, DOLBY PRO LOGIC II mode
cannot be selected.
• Panorama Mode
This mode extends the front stereo image to include the surround speakers for an
exciting “wraparound” effect with side wall imaging.
• Center Width Control
This control adjusts the center image so it may be heard only from the center speaker;
only from the left/right speakers as a phantom image; or from all three front speakers to
varying degrees.
• Dimension Control
This control gradually adjusts the soundfield either towards the front or towards the rear.
2 3
Press the Pro Logic II button. Press the DSP/DPL II Mode button.
1
Press the Function button on the front panel to select the desired function.
• Each time the Pro Logic II button is pressed.
• Select from FM ➞ AM ➞ DVD ➞ DIGITAL IN ➞ AUX 1 ➞ AUX 2.
• Each time the DSP/DPL II Mode button is pressed.
• Each time the DSP/DPL II Effect button is pressed.
PRO LOGIC L R
L R
PRO LOGIC L R
PRO LOGIC L R
PRO LOGIC L R
PRO LOGIC L R
PRO LOGIC II : Left, Center, Right,
Subwoofer and
Surround(Left, Right)
Channels
STEREO : Left, Right and Subwoofer Channels
Dolby Pro Logic II decoder
Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over
conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, but
also regular stereo sources into five channels (front left/right, center and surround left/right). In addition,
various parameters can be set according to the type of source and the contents, so you can adjust the
sound field with greater precision. This function works only in the DPL II M (Dolby Pro Logic II Music ) Mode.
Pro Logic II Mode
Select one of the modes (“Music”, “Cinema”, “Pro Logic” or “MATRIX”).
• The Music mode is recommended when listening to CDs or watching DVDs with mostly
musical content.
• The Cinema mode is best when watching movies.
• The Pro Logic mode offers the same surround processing as original Pro Logic and is
best used when the source contents are not of optimum quality.
• The Matrix mode is useful for when the audio is mono.
Dolby Pro Logic II
1 2
Press the DSP/DPL II Effect button.
Select “0” or “1”
The control can
be set in 8 steps
from 0 to 7.
The control can
be set in 7 steps
from 0 to 6.
Use the Left/Right ( / ) button to make
adjustments. ▲
▲