Sharp PC-MM1 - Manual (Page 104)

7-14
7
In case of Windows Me
When the host computer is Windows Me, cancel the password on the host computer,
before deleting the user password in the Setup Utility of the MM series.
1. Cancel
the password.
2. Stop the device.
3. Remove your computer from the connection cradle.
Run the Setup Utility on MM series and delete the user password. For details on
deleting the password, see Chapter 6.
Be sure to cancel the password using Password Utility (see the previous
page) before deleting the password. Otherwise, the MM series will be
recognized as a removable disk, when you connect the MM series to the
host computer second time
In order to make MM series recognized as an external hard disk again,
do the following:
1. Connect MM series to the host computer.
2. Open
the Password Utility and type the user password.
3. Click Cancel.
4. Stop the device.
5. Turn off the connection switch on the connection cradle.
6. Turn on the connection switch on the connection cradle.