Sharp PC-MM1 User Manual
Page 89
6-5
6
Your computer supports two different levels of password security: Supervisor
password and User password. You cannot set a user password unless you have set a
supervisor password. If you share your computer with others, we recommend that you
set both the supervisor and the user password, and let others know the user password
only.
If you type the user password when you enter the Setup Utility, you can change
System Time and System Date of the Main menu, Resolution Expansion of the
Advanced menu and Set User Password of the Security menu only.
Setting Password
1. In
the
Security menu of the Setup Utility, select Set Supervisor Password or Set
User Password and press Enter.
2.
Type your password (up to eight characters), and press Enter.
3.
Type the same password again, and press Enter twice.
4. Select
Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter.
5. Confirm
Yes is highlighted and press Enter. The system restarts.
Changing Password
1. In
the
Security menu of the Setup Utility, select Set Supervisor Password or Set
User Password and press Enter.
2.
Type your current password, and press Enter.
3.
Type your new password, and press Enter.
4.
Type your new password again, and press Enter twice.
5. Select
Exit menu and confirm Exit Saving Changes is highlighted; then press
Enter.
6. Confirm
Yes is highlighted and press Enter. The system restarts.
Deleting Password
1. In
the
Security menu of the Setup Utility, select Set Supervisor Password or Set
User Password and press Enter.
2.
Type your current password, and press Enter.
3.
Without typing any characters, press Enter.
4. Press
Enter twice.