Connecting a tv and vcr – Sony KD-27FS170 User Manual
Page 14
8
Conne
ct
ions
KD-27/32/36FS170
2-670-362-21(1)
Connecting a TV and VCR
1
Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
❏
If your VCR is equipped with video outputs, you can get better picture quality by
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
❏
For better picture quality, use S VIDEO (located on the rear panel) instead of the yellow
video cable. S VIDEO does not provide sound, so you still must connect the audio cables.
✍
To watch video programs from your VCR, tune your TV to Channel 3 or 4 (as set on the rear of your
VCR).
✍
You can use the
button to switch between the VHF/UHF and VIDEO inputs.
ATSC
ATSC
Optional connection
Audio R (red)
Video (yellow)
Audio L (white)
Rear of TV
VCR
2
1
From
cable/antenna