Sony KD-27FS170 - Manual (Page 15)

9
Conne
ct
ions
KD-27/32/36FS170
2-670-362-21(1)
Connecting a TV and Cable Box
Some cable TV systems use scrambled or encoded signals that require a cable box to view all
channels. If you subscribe to such type of service, use this connection.
1 Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
Optional connection
❏ To view channels from your cable box, tune your TV to channel 3 or 4 (as set on the rear
panel of your cable box) and use the cable box's remote control to change channels.
❏ If you will be controlling all channel selection through your cable box, you should
consider using the Channel Fix feature by setting your TV to channel 3 or 4 (see page 22).
ATSC ATSC
VIDEO
LINE
OUT
AUDIO L AUDIO R
1
2
Rear of TV
Cable box
From cable/
antenna